ETC Consoles Fader Cap Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ETC calls these "Small Fader Pot Knob" - caps for faders on a variety of ETC consoles.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The most faithful reconstruction of an ETC "Small Fader Pot Knob" that I could manage. This fits a wide variety of ETC consoles. They can be purchased from ETC for $1 each, but are only available in black - I like having the ability to use different colors.
Recommend printing on its side with supports as shown in the screenshot. Use support blockers inside the hole that the fader stem sticks into - a decently tuned printer should have no problem with this bridge and getting supports out of such a tiny hole is a massive pain.
As far as I'm aware, this fits the following consoles:
Ion Classic (grand master fader)
Ion XE 20 (not master pair faders, just internal fader wing)
Universal Fader Wing
EOS Standard Fader Wing
Element, Element 2
ColorSource 20, ColorSource 40, ColorSource 20 AV, ColorSource 40 AV
SmartFade 1248, SmartFade 4896, SmartFade ML
Congo Jr.
Express 24/48, Express 48/96, Express 72/144, Express 125, Express 250
I suspect it'll also fit an EOS motorized fader wing, but I don't have one to try on.