Lone Peak V1 Camper Awning Wind Fairing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wind faring for a side mount 270 Awning on the V1 Lone Peak truck camper.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 188
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a wind fairing specifically for the side T-track profile for the Lone Peak V1 Truck Camper. Designed to cover about a 150mm X 150mm packed profile of a side mount 270 awning (specifically the OVS HD 270 LTE Awning).
Best material would be ASA but ABS or PETG would be suitable (but show UV degradation over time). I recommend 4 walls and 25% infill with at least a 10mm brim since this geometry will be prone to warping.
Additional Materials required:
Non-HD version needs two M8-12 or M8-16 button head bolts with lone peak t-nuts.
HD versions needs two M8-16 or M8-20 button head bolts with lone peak t-nuts.