1 / 1
Wall or Dell Monitor Mount for Argon Neo Case for Raspberry Pi (such as 4 Model B)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This has the old wall mount but prints without support and has a monitor mount.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Place the screws through the "rear" holes (It is easier to install if you set them in the holes beforehand).
Add (4) M3 heat-set threaded inserts into the "front" part.
Look at the "rear" and place the "front" part on the front of the stand so the inserts are facing you.