1 / 1
10 inch rack mount for Mikrotik RB951 and Tapo Hub H200
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for Tapo Hub H200 and Mikrotik RB951 in 1U 10 inch rack format
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Printed with ASA, 3 wall and 15% infill.
Both have a tight fit so just need to make the flush with front. The Tapo H200 was used with rubber feets and Rb951 without rubber feets
After printing, I drilled 2 small holes and then used wire snippers to make way for DC power cables. You can modify the same before printing.
