Vari Standing Desk Monitor Riser Riser for Mac Studio.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple 7mm high riser to extend the height of the Vari Monitor Riser accessory for their standing desk.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I recently bought a Vari standing desk with the Monitor riser accessory. Despite saying it was 4 inches tall on the website, it was slightly too short to fit my Mac Studio beneath it. I modeled a simple riser for the riser to accommodate. (it can also fit a munbyn label printer underneath as well).
NOTE: I did not want to source longer hardware to accommodate the additional height, so I used a forstner bit in my drill press to extend the holes so the included hardware could still work; if you do not wish to drill into the MDF, you'll need to source longer hardware.
Printed at standard settings in PLA. It’s a simple part, print it in whatever you like!