1 / 2
Jubilee Baby Bullet tool - LGX Lite + Mosquito variant — zdjęcie 1
1 / 2

Jubilee Baby Bullet tool - LGX Lite + Mosquito variant

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Jubilee Baby Bullet tool - LGX Lite + Mosquito variant

Ocena
0 / 5
Polubienia
8
Pobrania
35
Wydruki
0
Wyświetlenia
927
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is a tool to be used with the Jubilee toolchanger. It is a remix of the existing Baby Bullet tool and uses the Baby Bullet aluminum toolplate. Instead of the E3D V6 groove mount, it has 4 mounting holes for a Slice Mosquito hotend. Instead of the LDO Orbiter extruder, it has mounting holes for a Bondtech LGX Lite extruder. First mount the Mosquito using the 2.5mm hardware supplied by Slice. Then, mount the LGX Lite using the bottom-mount holes of the extruder using M3 x 10mm bolts.

There is also a ziptie holder that mounts tot he side of the LGX Lite and is meant to hold a large ziptie to keep the wire loom from falling over. Use a small ziptie to keep the head of the large ziptie attached to the bracket.

There is also a PTFE cutter designed to get the perfect length PTFE between the extruder and hotend. Use a hobby knife / Xacto knife to chamfer the front edge of the PTFE and to cut to the correct length.

Tagi