Erogonomic Handle for SWAGIER hydro e-brake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple clip-in ergonomic handle for the widely popular (at least in the EU), Swagier e-brake
- Ocena
- 0 / 5
- Polubienia
- 2
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
Simple clip-in ergonomic handle for the widely popular (at least in the EU), Swagier e-brake
The model is well fitting as I scanned the handle and took it through many iterations
DISCLAIMER: The model was designed on my particular handbrake and installed on one other e-brake of my friend so I am confident that it will fit most e-brakes of this model.
the e-brake: https://www.swagier.com/hamulce-reczne/51-hydrauliczny-hamulec-reczny-uniwersalny-drift-kjs.html?search_query=hydra&results=35
The handle can be printed from
PETG at
0.15mm layer height, with a
0.4 mm nozzle for a nice finish.
infill is up to your preferences but I run mine with just 10% and 2 perimeters
The connecting pegs
have crush ribs that facilitate a good press-fit and take in some of the tolerance differences that are inherently present on each single handbrake.
I have printed mine from PLA at 0.15 mm LH and 0.4mm nozzle.