1 / 2
Monsieur Cuisine Vegetable Grater Blade Lock Collet (Safety / Fix Mod) — zdjęcie 1
1 / 2

Monsieur Cuisine Vegetable Grater Blade Lock Collet (Safety / Fix Mod)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple 3D printed collet to keep Monsieur Cuisine grater blade in place and prevent cutter damage.

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
165
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Public Domain

The Monsieur Cuisine vegetable grater attachment has a common design issue: the blade insert is not properly constrained on the rotary axis.

In some cases during use, the blade can move upward while spinning, eventually catching the plastic cutter body, which may lead to the cutter breaking (and obviously isn’t great from a safety point of view either).

To fix this, I designed a simple 3D printable collet / locking ring that sits on the axis and keeps the blade firmly in position, preventing axial movement while the grater is running.

This is a small part, quick to print, and can save your grater from cracking / snapping when the blade shifts.


What this part does

✅ Locks the blade insert on the rotary axis
✅ Prevents upward movement during rotation
✅ Stops blade catching the cutter housing
✅ Helps prevent the original plastic part from breaking


Printing recommendations

  • Material: PETG recommended (good strength + slight flexibility)

    • PLA may work but is more brittle over time

    • TPU not recommended (too flexible)

  • Layer height: 0.2mm

  • Perimeters/Walls: 4

  • Infill: 10% (it’s small anyway)

  • Supports: none

  • Orientation: print flat as uploaded


Installation

  1. Insert the blade as usual

  2. Fit the collet on the axis above the blade

  3. Assemble and use normally

No glue, no screws, no modification of the original part.


Disclaimer

This is an unofficial aftermarket part. Use at your own risk. Always test at low speed first and inspect for good fit before normal use.

Tagi