Designer wall mount for storing cross-country skis and ski poles with logo/nameplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for storing cross-country skis and ski poles, consisting of a hanger, locking plate and logo/name plate
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Designer wall mount hanger for storing/displaying cross-country skis and ski poles
with a locking plate (click in on the hanger) to secure the skis and poles
and a logo/name plate (click in on the locking plate)
mountable with two 5x80mm countersunk screws, which are also stabilizing the hanger.
easy to print, no supports needed
A matching model for alpine skis and poles is availhereable here.
There is a blanc name plate where you can add text or a logo with the slicer
Preconfigured logo plates for Fischer, Head, Kästle, Rossignol, Salomon are available here.
Cross-Country Ski and Pole dimensions:
Ski pair maximum thickness 8mm
Ski width on the hanging point maximum 60mm
Ski pole diameter maximum 18mm
Printing instructions
for best results do not change the orientation of the parts
PETG recommended (PLA may work also, but is more brittle)
0.4 nozzle
0.2mm Structural
3 Perimeters
15% infill Gyroid
no supports needed
Hanger usage:
place both cross-country skis with the running surface together.
place the ski pair in the holder with the narrowest part under the ski tips.
place the ski poles into the recesses left and right at the holder
push the locking plate on the holder
add a name/logo plate to the locking plate if desired
![]() | ![]() | ![]() |
|---|


