1 / 1
Herman Miller Embody + Atlas Headrest: keep the tag visible!
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I just wanted to keep the Herman Miller Tag visible after installing Atlas Headrest so I made a simple TPU loop.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 62
- Wydruki
- 2
- Wyświetlenia
- 1173
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (10)Powiązane
Print settings
I made it from 95A TPU, softer should work too, with:
3 walls
5 bottom layers / 4 top layers (it should be 100% plain)
Installation
1 - Print the tag holder

2 - Fold it


3 - On the Atlas Headrest: unscrew 3 screws

4 - Place the tag holder, notice the right side (buttons should face down to keep the tag in place)


5 - Screw back

6 - Place the tag
