Hero Me Adjustable Endoscope Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick to print adjustable endoscope mount for ~8.5mm endoscopes.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
A lightweight and quick-printing adjustable endoscope mount for the Hero Me hot end system and 8.5mm cameras. Mounts to the front accessory mount via 2xM3 screws, and uses a second M3 screw to clamp the endoscope. None of the existing models had the adjustability I wanted to aim the camera at the nozzle, and most were for a narrower endoscope.
One version of the arm uses an M3 heat set insert, the other a regular M3 nut.
Mine is printed in PLA and has been working fine for a while now. If you print materials with very hot bed temps or in a heated enclosure, pick a suitable material that won't sag at those temps.