1 / 5
LEGO A-Wing Vertical Wall Mount (2020 UCS - 75275)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Vertical wall mount for the LEGO UCS A-Wing Starfighter released in 2020 (75275)
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 1246
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (30)Powiązane
Wall mount for the LEGO UCS A-Wing Starfighter (75275). Square peg fits into the hole intended for the stand, and lego studs add a little extra stability. Holds the model vertically at a slight angle so that fins and nose clear the wall.
Updated 5/15 with some slight refinements. I have some additional ideas to improve the design and will plan on uploading them if/when I get a chance to implement them.
Link to the matching X-Wing version also pictured
Change Log
- 5/15/23 - Added v2
- Reduced the overall size for much faster printing
- Added countersink to the back to accomodate drywall anchors
- Improved the positioning/fit of the Lego studs
- 5/16/23 - Added v3
- Widened the bottom screw hole slightly so the mount can be leveled when your holes don't line up perfectly.
- 5/19/23 - Added version with minifig stand
- This one has a small arm with two studs that displays the included minifig next to the A-Wing.