Moza HGP Mount for Playseat Challenge

I made a Moza HGP shifter adapter for the Playseat Challenge Universal Mount.
There is an angle adjuster so you can make it parallel to the floor.

1) Print as oriented in model
2) Use 4x bolts, nuts and washers around perimeter. This reinforces the weak spot. See photo of my broken V2 model. The V2 model is available, but I wouldn't use it unless you have super-mega-awesome layer adhesion filament. 
3) Attach Shifter Plate to Universal Mount. There is an angle adjustment so you can make it parallel to the floor. Make sure to use a washer on each bolt.
4) Use the M6 bolts and washers that came with the Moza HGP to attach it to the shifter plate from the bottom.
5) There is another 4 holes where you could add another 4x bolts, nuts, and washers, but I didn't bother.

You can ignore the weird wall lines in my photo. It came off the print bed like that. My print warped, but I kept it anyways.
I uploaded the original "Playseat Challenge Universal Mount" files just to prevent the possibility of any future revisions breaking compatibility.

Printed with 30% cubic infill and 2mm walls using a 0.4mm nozzle.
Mirror the model in your slicer if you want a left-hand shifter.

Hardware:
 + 16x M6x25 bolts
 + 16x M6 nuts
 + 6x M6 washers
 + 4x M6x12 bolts and washers (use the ones that came with the Moza HGP)

Breakdown:
  Universal Mount Hardware:
   + 12x M6x25 bolts and 12x nuts for the Universal Mount
  HGP Shifter Plate:
   + 4x nuts, screws and washers for the plate reinforcement
   + 2x extra washers when mounting the plate to the universal mount
   + 4x M6x12 bolts and washers to attach the HGP to the plate (use the ones that came with the Moza HGP)

Created in Onshape:
https://cad.onshape.com/documents/adf7ad609378acbc51ee3616/w/6ed003e424bd53f5e0243583/e/f22d9678a5dca9ec89db9e62?renderMode=0&uiState=696935f90b8c0f2269c086c7