Adjustable eye patch with joint for sport shooters, ISSF compliant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ISSF-compliant eye patch for printing yourself Eye patch width 30 mm, height 45 mm
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
The aperture and the aperture holder are printed with a layer height of 0.2 mm. The aperture consists of three layers and is still sufficiently translucent in white.
The aperture holder is printed with 80% infill at a layer height of 0.2 mm. The cones on the visor can then be inserted into the visor holder with light pressure (see photo). This allows the visor to rotate and provides sufficient friction so that it does not adjust itself during use.
The headband holder is printed with 40% infill.
The visor joint is printed from TPU with 20% infill. This makes it flexible enough to be inserted into the headband holder, and the axis of the aperture holder fits into the hole in the joint with sufficient friction. This allows the height of the eye patch to be adjusted by moving the axis; the axis can also be rotated. In addition, the joint can also be rotated slightly in the headband holder.
PLA/PETG Layer 0.20mm 80% 0.4n
AK_Blende30
AK_Blende40
AK_Gabel
PLA/PEGT Layer 0.20mm 40% 0.4n
AK_Halter_gross
AK_Halter_klein
TPU Layer 0.20mm 20% 0.4n
AK_Gelenk