19" Rackmount Brackets for Lancom 1326 Network Switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will fit a Lancom 1326 switch or any other device with an identical mounting hole pattern
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
I recently acquired an old Lancom network switch, practically new in box. It came with everything, except the rack mount brackets. But hey...what's a 3D printer for, right?
So I made myself a bracket that fits. The overall dimensions follow the standard for any rack mount hardware, so there should not be any issues. These brackets mount on any full-width 19" device with four mounting holes on its side. The four mounting holes on this model are spaced 14.7mm apart from each other in a square pattern. The brackets are mounted with M3x8 countersunk screws.