1 / 3
Dual SD Card Holder - Print in place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to give back 2 cards to a friend and was lacking a good dual case at home.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
A small SD / SDXC card case that folds like a book. Prints easy and gets the job done - two cards have a case and you can check what's on them through a window.
There are two versions - with cards in one side of the book or center (better in my opinion).
Printing Notes
Print in PLA or PETG
No supports!
0.15-0.20mm layer
Quick, simple, and practical little model
Hardware Required
two 8x2mm magnets