Xshot Piston Pump battery bay expander
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extender that attempts to exactly match the curvature of the stock on the MPP
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
This was made because what I wanted did not exist, at least, not in the format I wanted. As far as I can tell, this is the only battery bay expander that really tries to match the complex curvature of the back of the Xshot piston pump stock. Oh, and did I mention that it uses the stock latching mechanism?
To print: import the .step file and minimize the mesh generation sliders. I have found that this creates the most accurate part in the end as it minimizes the amount of features lost in translation rather than exporting an .stl from CAD and using that.
Parts required:
the battery bay expander
latch mechanism from the Xshot
latch mechanism cover
the two screws that secure the cover
To build:
insert latch/spring as shown in the third photo
install cover and screw as shown in the fourth photo
Done!