Spiralize/Vase Mode Modular Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to be printed in vase mode using a 1mm nozzle @ 0.8mm layer height as well as using a regular 0.4mm nozzle.
- Ocena
- 5 / 5
- Polubienia
- 86
- Pobrania
- 479
- Wydruki
- 4
- Wyświetlenia
- 3112
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to be printed in vase mode using a 1mm nozzle @ 0.8mm layer height as well as using a regular 0.4mm nozzle.
I've added a back to the sleeve with a hex pattern to increase strength and stability while only using a small amount of material. The drawers won't ever slide out the back and the strength and rigidity increase is substantial.
If printing with a 1mm nozzle the sleeves will no longer be able to slot into each other(they work fine with a regular 0.4mm nozzle). I use a little glue to hold a bunch of these together. While not as convenient it does work fine and with the 1mm nozzle and vase mode I can print a sleeve and drawer in about 45 mins. If you need them to slot together, use a regular nozzle.
Files:
Tabbed_Drawer_Sleeve-RetromanIE-122mm.stl
70mm x 70mm x 122mm
Drawer-RetromanIE-v3.stl
127mm x 60mm x 60mm
Large_Tabbed_Drawer_Sleeve-RetromanIE.stl
91mm x 91mm x 158.6mm
Large_Drawer-RetromanIE-v3.stl
165.1mm x 78mm x 78mm
Print instructions
Print in vase mode.
1.0mm nozzle works best, but 0.4mm also works and has the added benefit of allowing the drawers to slot into each other.