Piranha Pipe Planter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple planter design shaped like the famous green pipe. Can also be used as pen holder, or whatever you want really.
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 1240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed a simple planter shaped like the green pipe from the famous Italian plumbing game. It is printed in parts so you don't have to worry about overhangs or bridges. The pieces can easily be glued with a little superglue or, depending on your print tolerances, pressed together in a friction fit.
I recommend printing the container if you plan on using this as a planter. The container has a few holes in the bottom to allow water to escape into a little space on the bottom of the planter. I printed the container in PETG and the pipe in PLA and had no problems with water or dirt affecting the print.
The included 3MF files are for a stock Prusa MK3. Open them in PrusaSlicer and used them to generate and inspect your gcode.