1 / 8
FORD F100 1956 pickup - NO AMS/MMU — zdjęcie 1
1 / 8

FORD F100 1956 pickup - NO AMS/MMU

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

FORD F100 1956 pickup - NO AMS

Ocena
4 / 5
Polubienia
116
Pobrania
528
Wydruki
0
Wyświetlenia
2046
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

1956 Ford F100 Pickup - Stylized 3D Print

This is a high-quality 3D printable model of the iconic 1956 Ford F100 Pickup. Designed with a clean, stylized look, it’s a perfect project for classic car enthusiasts and makers alike.

Key Features:

  • No AMS Required: Designed for easy printing even on single-material printers.

  • Fully Scalable: The model can be freely scaled up or down to suit your needs.

  • Modular Wheels: Rims and tires are printed separately. This allows you to print tires in TPU for a realistic feel while using PLA or PETG for the rims.

  • Rolling Chassis: To make the wheels functional, simply use a piece of wire as an axle.

    • Note: At 100% scale, use a 1.6mm diameter wire. If you scale the model, adjust the wire thickness accordingly.

  • Display Option: If the model is for display only, you don't need to install axles. The truck body can simply rest on top of the wheels.

Customization & Finishing:

  • Detail Painting: You can easily add a personal touch by painting the windows, lights, and trim after printing. Acrylic markers (like Posca or similar) are highly recommended for fine details and clean lines.

Recommended Print Settings:

  • Layer Height: 0.16 mm (for a smooth finish on the curves).

  • Infill: 15% Gyroid (provides great structural strength).

  • Supports: Depending on your printer's bridging capabilities, minimal supports may be needed for the wheel arches and front grille.