A burger patty press.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A burger patty Press with ring split into three parts to avoid supports.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a basic burger patty press to make 4.5 inch patties for standard burger buns in the US
Remember 3d printing food equipment is not recommended due to possible bacterial growth in spaces between layer lines, so please use with caution and at your own risk!
This is a three part print and should fit on most printers in one plate if the press is centered in the ring. I designed it to print without any supports. The handle has a pin with a 2mm offset, and re-enforcing microstructures for added strength. It locks into place when printed on my printer. Pics are printed in PETG at a .2mm layer height.
Fusion file included if you need to tweak or remix.