1 / 4
FRC Intake Mecanum Wheel 1/2 in Hex — zdjęcie 1
1 / 4

FRC Intake Mecanum Wheel 1/2 in Hex

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Easy to print mecanum wheels for FRC vectored intakes.

Ocena
0 / 5
Polubienia
11
Pobrania
219
Wydruki
0
Wyświetlenia
599
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Remix based on: https://www.printables.com/model/118272-vectored-intake-wheels-for-frc

  • Screw holes were modified to fit #10-32 screws and moved slightly to the side to accommodate larger nuts. 

The mecanum wheel is slightly larger than 2 inches in diameter, and you need 8 rollers per wheel.

If you want a different vector direction, mirror the side plates in the slicer.

Model Update [1/19/2026] - Added a new Nut Trap version that has holes for 3/8 in #10-32 nuts 

  • Fits nuts 3/8 inches in diameter (common #10-32 nut size)

  • Some nuts might stick out slightly

  • Works best with 2-inch long screws, so that the screws don't stick out

  • Screw holes were moved slightly more to the edge

Tagi