1 / 2
80mm Extractor Tube Lock
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lock to grip an 80mm extractor tube to a 70mm pipe or tube
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is designed to securely grip an 80mm extractor hose onto a 70mm diameter tube. Effectively doing the job of a jubilee clip (though not adjustable)
Directions
- Slot the TubeLock onto the hose (with the thicker grip facing away from the end of the hose)
- Position the hose onto the target tube
- Place the two Tube Grips around the hose on top of the tube (with the thicker part facing away from the end of the tube)
- Slide the Tube Lock up and over the two Tube Grips to lock them in place
Required:
- 1x Tube Lock
- 2x Tube Grips
Whilst this is designed for 80mm tube locking onto a 70mm pipe, you should be able to scale them to fit whatever you like relative to that.