Ring Stacking Toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rendition of the old school Fisher Price/Little Tikes stacking toys for children.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 175
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Open Community License v1
This print was planned to utilize 4 colors. The base and top ring were printed in green. Rings 6 & 3 were printed in yellow. Rings 5 & 2 were printed in red. And rings 1 & 4 were printed in blue.
Using my K1C, the total print time at 0.16mm layer height with a 0.4mm nozzle was a little over 20 hours.
I found that rings 5 & 1 can be printed in one go, as well as rings 1 & 4. The remaining two rings (3 & 6) were slightly too large to print in one go on my build plate. If you were to be using a printer with a build volume larger than 220x220x250mm, you can most likely get it done in one go.
s0 - color 1
s1 - color 2
s2 - color 3
s3 - color 4
s4 - color 2
s5 - color 3
s6 - color 4
base pole - color 1
Otherwise, have fun and go hog wild with colors of your choice.