Cover and Plug Shoe Stitching Machine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for shoe stitching machine
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Open Community License v1
Cover replacement with plugs, the original part broke and we designed it to fabricate with 3D printing.
The cover was prnted in PLA because the zone where this assemble is not heat and the plugs or caps were made with TPU 85A beacuse it's easier insert and retract them for the low shore hardness.
We did a lot of proves to get the cover fit in the machine and we got it but you'll find the STEP file to modify the measures for your machine.
0.3 layer height beacuse only it's necessary the geometry not the quality.
Supports inside.
You can support us if you subscribe to our Youtube channel 👇, it's free!