Parametric Mesh Screen - Round
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Define your screen size, pitch, and other slice/print parameters in OpenSCAD to create your screen/mesh model to print.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 855
- Wydruki
- 0
- Wyświetlenia
- 2348
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I created this to make small screens to fit in outside air vents. The goal is to keep insects out while not impeding airflow too much.
OpenSCAD model that I wrote is included so you can re-work the parameters and customize your screen to print directly or use as a component to another model you are creating.
It is an example of using for loops in OpenSCAD to minimize code for all of the mesh lines. Rendering is a little slow, so I would be open to tips you might have on how to make my model more efficient!
If you need a square or rectangle mesh instead, see this model:
https://www.printables.com/model/161521-parametric-mesh-screen-squarerectangle