Easy Print Galloping Horse, Split Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A easy printable galloping horse.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to print a horse at full gallop, but conventional models always leave ugly marks because of the support structures. That's why I remixed a nice model. By cutting it in half, support structures are now only needed on the inner sides of the legs and ears.
You need a thin line of support at the inside of the legs and the ears.
Print the horse in high detail it's worth it. A layer height of 0.2 mm is sufficient for the pedestal.
You can download the 3mf or bgcode file for Core One or Prusa Mini, so you can direct start printing and don't have to draw the support line.
Let the printed model cool, then you can easily snap off the supports
Use an adhesive that does not harden too quickly so that you can align the two halves nicely. I like to use “Uhu Hart” for this.
Changes:
18.01.26 Added some photos with a painted horse. (First model with the Prusa Paint Set)
https://www.prusa3d.com/de/produkt/prusa-starter-paint-set-miniature-painting-for-beginners-online-course-bundle/