The Epic Stomp Rocket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on the 3D Printable Stomp Rocket. To the mooooooooon!
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 103
- Wydruki
- 4
- Wyświetlenia
- 711
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by LoboCNC (on thingiverse) This download contains all the files required to print your very own Epic Stomp Rocket. It comes with a few different cup decorations to choose from including "JBV Creative", "To The Moon", and "Rocket Science", along with a blank version.
(The spring shown in the photo is not required!)
Recommended print settings for base and cup:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 15-18%
Approx. 20h print time
Recommended print settings for base and cup:
Layer Height: 0.2mm
Nozzle: 0.4mm
Infill: 100%
Approx. 3h per rocket
**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!