FAME Smart Inline Valve Preview 1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soon with software!
- Ocena
- 0 / 5
- Polubienia
- 3
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
Please note this is a club preview, the text that follows is intended for the final product and may not represent the current state of the project. The model is practically complete, however currently there is a short delay on the software.
FAME Smart Inline Valves are low cost, open, easy to maintain self-build smart valves for 100mm pipe, useful for directing airflow in pipes in your workshop or possibly small ventilation systems. It features:
Simple initial setup via BLE
App based control over wifi
Optional Home Assistant integration via MQTT as a "cover" entity
The ability to daisy-chain many valves from a single controller
The software has feature parity on all platforms, with simple and streamlined setup of your device.
Hardware
FAME Smart Inline valves has a fairly small hardware list compared to some of my other builds:
A FAME Smart Servo Node to control the valve(s)
Feetech ST3215 (good) or ST3250 (overkill) servo
A longer cable for the servo/controller. I have purchased 90cm ones from Feetech.
One 608 bearing
2x M2 heat set inserts
6x M3 heat set inserts
2x M2x6mm (or M2x8mm) screws and washers
2x M3x8mm screws and washers
The build guide can be found under the Files tab in PDF format.
Software
Coming soon!