1 / 6

MayAudio Sword (DIY Hifi Headphone)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MayAudio

@MayAudio_3963030

DIY Hifi Open-back Headphone using high quality 50mm drivers. Designed in Finland. Made for pure sound quality.

Ocena: 0 / 5
Polubienia: 12
Pobrania: 67
Wydruki: 1
Wyświetlenia: 1255
Oceny: 0

Aktualizacja u źródła: 21 wrz 2026

Informacje o modelu

Źródło: Printables
Kategoria: Audio
Licencja: Creative Commons — Attribution — Noncommercial — Share Alike

Szczegóły Pliki (37)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (10)

Hifi Open-back Headphone using high quality 50mm drivers.
The sound is very accurate to the 10dB tilt Diffuse Field kb501x target.
The goal of these headphones was to make an HD6XX-esque sound without treble peaks and more subbass. The goal has been reached! Welcome to the lovely intimate and visceral sound of the Sword.

If you want a warmer darker sound like Audeze headphones then make the Odyssey Edition with Soulwit CG pads and gray foam!

Made to work with any headband, headphone diameter is 86mm.

Part	Link
3D printable headband	Capra Audio Headband v3
Yokes for the 3D printable headband (Satyr 2 Yoke Left + Right in the NEW one)	Capra Audio Satyr 2
Aftermarket headband (remember to print VZR yokes)	VZR headband
Earpads	Soulwit CG pads
Driver (buy two)	HPD-50N25PR00-32
Heat inserts	Amazon heat inserts Aliexpress heat inserts
Micropore tape	3M micropore tape
Sockets	3.5mm sockets
Dekoni foam	Foam attenuation kit
Internal wires	Wires
M3 screw set (you need 3 6mm screws, 4 10mm screws and 2 12mm screws + 4 10mm screws if you print the 3D printable headband)	Amazon screws Aliexpress screws
OPTIONAL: 47 Ohm resistor (if you want more bass)	Resistor set
PLA Filament (use any decent one)	Polymaker PLA Pro
Cable (2x3.5mm)	Openheart cable

Alternative earpad options for different sound tunings:

Link	Description
Gvoears CG pads	A bit more upper 2-5kHz, less 700-1.9khz, for smaller ears
Soulwit MF pads	More v-shaped sound, bigger
AHG leather pads	Very balanced sound, small ear space
Soulwit M50x CG	A bit brighter sound, very comfy
Soulwit M50x velour	A bit brighter sound, very comfy
Brainwavz micro suede	Gives a soundstage effect, more ear space

What I always recommend you to do is to adjust the back foam/micropore tape to tune upper midrange, and adjust the front micropore tape to adjust bass level!

Assembly instructions: https://github.com/Maja5Dev/MayAudio-Sword/blob/main/Assembly%20instructions.md

Designed in Finland.
Made for pure sound quality.

Join our discord server: https://discord.gg/FM5Sw2YNhX
Support us on kofi: https://ko-fi.com/maya224696

Tagi

headphone headphones audio hifi