Ventilated Chromecast Rear TV Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ventilated Chromecast holder for rear TV mounting, reducing HDMI strain and preventing adhesive failure from heat
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Chromecast devices are often left hanging behind the TV, putting constant strain on the HDMI port and cable.
Trying to stick the Chromecast directly to the back of the TV usually fails because the device generates significant heat during use, which softens or melts the adhesive tape over time, causing it to fall.
The Solution
I designed this holder to solve two problems at once:
Cable Management
The holder works as a secure cradle, supporting the Chromecast so it no longer hangs from the HDMI cable.Heat Management
The design includes a separation wall and ventilation gap that allows heat generated by the Chromecast to dissipate away from the adhesive surface.
Material
PETG – Highly Recommended
Why PETG?
Chromecast devices can reach higher temperatures during operation. PLA may deform over time due to heat creep or softening. PETG handles higher temperatures much better and maintains the mechanical integrity of the holder.
Result
The double-sided tape is exposed only to the residual heat from the TV (which is much lower than the Chromecast’s heat), ensuring a strong, permanent bond.
At the same time, the Chromecast remains well-ventilated, improving reliability and keeping the installation clean and organized behind the TV.