1 / 6
Quest 3 charge port support/protection for BOBOVR S3 — zdjęcie 1
1 / 6

Quest 3 charge port support/protection for BOBOVR S3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Protective measures for the Meta Quest 3 are designed to prevent damage to the charging port from external forces.

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
0
Wyświetlenia
146
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Introduction 

This accessory is designed for the BOBOVR S3 Pro headset strap to support the charging cable for the Quest 3. Its minimalist design prevents the charging port from damage caused by external force or movement during use. Its operating principle involves limiting the torque and stress of the Type-C port.

Additionally, this accessory is compatible with charging cables and AMVR cables featuring a 6mm wire diameter, in other word the products shown in the following video: 

Build of material

Component 

Quantity 

Cable support(printed parts)

x1

Foam double sided tape

10cm

10mm double-sided hook and loop tape

20cm

You may use the head strap as mold to form the shape.

If your cable dimensions are smaller than those shown in the diagram below, my design solution should be directly applicable with little to no adjustments required.

Tagi