Centauri Carbon SM-33 Ultra lightweight toolhead no magnet version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just a remix that lets you use the original screws or printable push pins instead of using magnets if you dont have them
- Ocena
- 4,333 / 5
- Polubienia
- 30
- Pobrania
- 174
- Wydruki
- 3
- Wyświetlenia
- 1385
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Threw this together in TinkerCAD super fast because I have no clue how to design with real CAD programs. Wanted something without magnets as I'm not a fan.
The stock screws work well now, just make sure you screw them in and out a couple of times before you install on the printer so the screws can cut the threads into the plastic correctly. as long as you do this you wont have any issues.
If you dont want to use screws, the push pins work just as well and are very convenient. They have been working very well for me so far at least when printed with asa/abs. Just be aware you will likely have to scale them up or down a tiny bit in your slicer to get the best fitment. i recommend trying them out they print fast and are easy enough to pop out when you need to remove the toolhead
If anyone is interested in which version I'd recommend or think is best since I tried them all, I would say the one that has the rail to use the original mounting holes. just a nice solid fit. it prints nicely so long as you paint supports on the front "ramp" and under the rails.
assemble front and back pieces before installing just to make sure everything fits together properly
the "demogorgen" is a test model that the original creator made as a request that utilizes a quad duct design so if you try it out and have notes let him know!
Original model has some good info and deserves credit for the designs and all that check it out.