Core ONE 2kg Spool Holder with a Twist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Twisted spool holder for the Core ONE that can extend out to accept 2kg spools or be compact when using 1kg spools.
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 806
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Core One 2kg Twist Spool Holder – Remix
This is a remix combining two existing designs to create a more robust and user-friendly 2kg spool holder solution for the Prusa Core One.
The mounting concept is based on TheNomad’s Core One adapter, which allows the Prusa XL twist / expanding spool holder to mount to the Core One. The twist-style spool holder itself is derived from Karkovski’s expanding spool holder, originally designed to prevent accidental extension or collapse while in use.
Both designs work well. This remix focuses on making the system beefier, easier to assemble, and more durable long-term, especially in a tight installation area.
Assembly Overview
Remove the stock Core One spool holder from the printer. (Keep the screws we will use them.)
Install M3 heat-set inserts into the base adapter.
Place the M6 tee nut into the base adapter.
Assemble the twist spool holder onto the base, ensuring the key way features are aligned.
Thread the M6×75 bolt through the center of the spool holder and into the tee nut. (This is a good chance to break free the print-in-place twist spool holder if it is still stuck, before the M6 Bolt is fully tight, otherwise it will bind on the base.)
Tighten until secure, but do not overtighten. The twist mechanism should move smoothly without binding.
Mount the completed assembly to the Core One using the original M3 screws removed in Step 1.
Hardware Required
1× M6×75 bolt: https://amzn.to/3NoaE5a
1× M6 tee nut: https://amzn.to/3LiSst6
4x M3 heat-set inserts: https://amzn.to/4b6fX34
Recommended Print Settings (Important)
These settings are required for proper fit and function.
0.2mm layer height
4 perimeters
6 top / 5 bottom layers
30%+ infill
Material Recommendations
PETG for the twist spool holder (slippery materials work best)
ABS or ASA for the base adapter
Notes
The base adapter and twist spool holder are designed to work together as a matched set, they are NOT interchangable with Nomad's or Karkovski's designs unfortunately.
Tighter internal tolerances mean print profiles must be well tuned.
Poor print quality may result in friction or binding in the twist mechanism, be sure your machine is well tuned before hitting print.
Support My Work:
If you find this useful, consider supporting what I do: http://www.MandicReally.com/links