Trichrome filter holder for 75mm filters to cokin p series adapter rings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed to hold 3 75mm wratten filters in their case, any filter that fits 75x75x3mm should also fit
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a a quicker way to do my trichrome photography, both normal color and IR so i have designed this model.
There is two different filter holders for vertical and horizontal placement
Both will adapt to a cokin p series adapter ring. but have also included step files in case you want to modify it to fit some other filter system.
There are cut outs that fit 20x5x2 magnets I had left over from another project to help with quick/reliable advacing.
The holes in the filter holder are for heat set inserts for 2mm screws to hold the top plate in.
The first time you insert the filter holder into an adapter, it may be a little tight, but after a little bit it will ease up a little bit.
Printing:
I printed both filter holders with the channels the filter holder slips in to facing vertically with organic supports.
