Replacement Foot for Fakro Attic Ladder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Broke one of the plastic "feet" for my attic ladder some time ago, and modeled a replacement.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 50
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement for the Fakro ladder "foot" or "shoe", the plastic piece that covers the raw metal end of the ladder which touches the ground. It is a snug fit, which might need some light taps of a mallet to get on, but will stay put well.
I recommend printing this in PETG, with supports. The ribbed bottom should be facing up when printing.
This part is a bit taller than the original, I recommend removing both originals and swapping to these, as they are about twice as thick and likely more durable!