Modified menhir for reddadsteves Obelix for red wine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Reddadsteves fantastic Obelixs menhir to transport a wine bottle.
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 238
- Wydruki
- 2
- Wyświetlenia
- 2881
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To use this, you will have to increase the size of all model parts to 135% !!!
(the menhir is already resized)
After the first print of Obelix (https://www.prusaprinters.org/de/prints/127997-obelix), I had the idea of using the menhir as a wine bottle holder.
This also increases the WAF (women acceptance factor) for Obelix in our living room.
The .STL offered here refers to a wine bottle with a length of 750mm and a width of 310mm. The weight distribution just about fits. The angle of the bottle is not optimal. But it will prevent Obelix from falling back. Therefore, I recommend using the .3mf file and placing the bottle in the menhir according to your own feeling (and modifying it e.g. for Bordeaux bottles that have a larger circumference). Its should be quite easy by using the bottle part as “negative Volume” in PrusaSlicer.
I did not glue the menhir to the body, so I can switch between different menhirs for different bottle sizes.
All my thanks go to Reddadsteve for his more than excellent work.