Core One+ ESP32 Cam magnetic frame mount (no drilling, no screws)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this print holds your ESP32 cam housing in a corner of the core one frame you just need 3x 6*4mm cylinder magnets.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This design uses 3 cylindrical magnets (dia: 6mm, height: 4mm) to make it possible to mount an esp32cam housing to the prusa Core One + metal frame.
Print orientation:
see pictures
installation:
dovetail opening points towards top
slider goes in with the flat side first
glue in magnets (optionally add a thin painters tape on top to prevent glue residue to react with the frame coating
(cable routing and where to plug it in: https://help.prusa3d.com/guide/buddy3d-camera-for-core-one-installation_405529#899538)
compatibility:
It was some time ago that I printed the frame and I dont find it in my collections anymore but it looks like its been thise one, specifically the "GoPro_Like_Joint_Case_Clip.stl"