1 / 2
MMU3.Frame Holder R4.by Nigeke.20260114.r00 — zdjęcie 1
1 / 2

MMU3.Frame Holder R4.by Nigeke.20260114.r00

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MMU3.Frame Holder with 20 degrees increased Angle

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
56
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

MMU3.Frame Holder R4.by Nigeke.20260114.r00

When building the MMU3, I experienced some problems with regards to the PRUSA Frame Holder R4:

  1. I found the angle of the PRUSA Frame Holder R4 too steep to the extent that the connected PTFE tubes are interfering with the maximum build volume

  2. The tubes could extend into the maximum build volume at the back of the printer thus avoiding usage of the maximum extend of the printer

Therefore, I decided to increase the angle of the MMU3 by 20 degrees by creating/mod the Frame Holder and at the same time adding that tiniest little click on those brackets. From the pictures you can see the difference: in Black the original Part; in Blue the MMU3.Frame Holder R4.by Nigeke

To PRUSA: yes, you may use this MOD for the MMU3 in future on the condition you will use PRUSAMENT for it and definitely no bambu!

What you need:

  1. The Printed Part 2 pieces

  2. Original PRUSA fixing screws

  3. Allen key 2.5 mm

How to:

  1. Print the parts, 2 pieces, for this I recommend PRUSAMENT PETG, 2 mm shell thickness and 25% grid fill

  2. Remove the Original PRUSA MMU3 Frame Holder R4 in reversed order of the original PRUSA assembly guide and keep the screws

  3. Fit the 2 Printed Parts, MMU3.Frame Holder R4.by Nigeke, using the recovered screws as per the original PRUSA assembly guide

  4. Fit the MMU3 back on top of the PRUSA frame, and this time “click it”

  5. Organize your PTFE tubes, they are now higher and outside the maximum print volume

Notes:

  1. Only .stl provided, no bgcode/gcode files: Use PPRUSA slicer to make your own (they are printer/material dependent anyway)

  2. Use the best PETG you can get (PRUSAMENT is best choice here) 

As PRUSA said: HAPPY PRINTING!

Nigeke

Tagi