AVIXA CTS Certified Wall or Desktop Award
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang this on a wall, place it on a desk, or create a chain and hang it from your neck. Celebrate being CTS certified.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
Been in the AV field for a number of years and never got certified. Studied and passed the exam and thought I would celebrate. Now you can too.
1/26/2026 - Uploaded a printable stand.
Also spray-poly coated it to give that nice blinding sheen for your uncertified coworkers to envy.
Resolution - .2
Resolution - .24 for the white base.
Ironing for all layers
Infill - 10%
Tree Supports for the overhangs for the white body and gray inside pieces.
Brim for all parts would be my suggestion.
Raft for all the letters. They just snap off and good to go!
Raft for the Stand as well. At least to keep the corners from turning up.
FILAMENT AND COLORS:
Overture - Black PETG for the Gray ( I didnt have a decent dark grey, so black it is)
Zero - Twinkling PLA Bright Red (I didnt have any other red filament.)
Overture - Lemon Yellow PLA
Panachroma - Matte Cotton White PLA
ASSEMBLY:
By all means you can glue this together with some epoxy.
The ID portion in the upper left, that will most likely need to be glued down. I suppose I could make an update in the future to snap fit it in.
The yellow ring and grey outer piece snap right into place, and I found I did not have to glue those.
Finally, I sprayed on a poly coat. Once coated 3 or 4 times, it is solid.