1:29 scale Southern Pacific and Rio Grande Configuration Krauss-Maffei ML 4000 Cab Unit G Scale Locomotive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1:29 scale Southern Pacific Krauss-Maffei ML 4000 Cab Unit operating G Scale locomotive.
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 620
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 1:29 scale Southern Pacific Krauss-Maffei ML 4000 Cab Unit operating G Scale locomotive. This is an original design. You can see a video of it operating here: https://www.youtube.com/watch?v=_HtZxRTPkEw
Andrew Corbett has also provided a modified nose with the appropriate light configuration for the Rio Grande version. His nose also includes cutouts for lighted number boards (which I will also provide for SP when I can get around to it.) The Rio Grande nose is the file "KM Rio Grande Nose Modified.stl".
Andrew also has designed some fans and fan covers for the model (which in my opinion are much better than my fan covers.) With his permission, I have added those two files to this collection as "Andrew C KM Roof Fan Final.stl" and "Andrew C KM Roof Fan Grill Final.stl.)
You will need to purchase two (2) USA Trains R22-422 motor blocks to complete this model. I will be adding a lot more information on the construction of this model in the coming days.
Materials needed to complete the model:
- MF63ZZ Flange Ball Bearing 3x6x2.5mm Full Complement Bearings - quantity 8
- USA Trains R22-422 motor blocks - quantity 2
- M3 and M4 bolts in a variety of lengths.
- H62 Brass Round Tube, 9mm OD 0.5mm Wall Thickness
NOTE: I use battery power and design my locomotives for battery operation. As part of this, I always remove the "skates" from the USA Trains motor blocks. I find that the "skates," when left in place, can cause problems with derailments. All of my field tests of my motor mounting design have been successful in this configuration. If you intend to use track power, you may or may not want to remove the "skates." I have not tested a track power configuration of this locomotive.
ANOTHER NOTE: I do NOT recommend doing "acetone vapor smoothing" on any models. What acetone does to the surface also happens within the structure of the model and will weaken it.
Construction details:
- This model is 28-inches long.
- I have included two different versions of the pilot: one with a plow, and one without a plow.
- The base consists of four sections that are bolted together using M4 bolts. They are not glued together.
- The body consists of 7 sections which are epoxied together and then secured using M3 bolts.
- The motor mounting brackets are designed for USA Trains R22-422 motor blocks. The motor mounts must be printed on end so that the layer lines in the pivot section are oriented for maximum strength. I also encase the pivots with 9mm 0.5mm thickness brass tube to prevent the pivots from splitting along layer lines.
- This model does NOT use USA Trains mounting hardware - only the motor blocks.
- You must insert MF63ZZ Flange Ball Bearing 3x6x2.5mm Full Complement Bearings into the 3-D printed side frames and secure them in place using epoxy or some other glue.
- I recommend printing all large components on end for best results. Louvers and grills are best printed flat.
- All grab irons and hand rails are made of 1/16-inch brass rod.
- I have not yet designed any seats for the interior. I may eventually get around to doing that. There are supposed to be three seats.
- The Rio Grande configuration of lights is different than the Southern Pacific. If you want Rio Grande, you will need to modify the design to have a different light setup.
Painting details:
- On this model, I did some sanding of the ASA surface, followed by several coats of automotive primer. Small gaps are filled with two-part auto body filler and sanded.
- The model was airbrushed using standard acrylics thinned 1:1 with auto windshield wiper fluid. I use a heat gun to quickly dry the thin layers. Pointing a heat gun or hair dryer at a 3-D printed part is risky, so make sure you hold it FAR away from the model.
- For the interior, mix some dark green with white to get the most annoying green color imaginable, then paint the interior with that.