Housing for Shelly HT for outdoor use
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This housing enables you to use the Shelly HT outdoor.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 95
- Wydruki
- 2
- Wyświetlenia
- 1226
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a little housing to protekt the Shelly HT in outdoor use.
I have added the file "HT Hausing USB.stl". This file is an alternative to HT_Hausing.stl. I have added a notch with 5 mm width for an USB-Powerline and a hole in the buttom to let water drain if some water comes in. I have not testet this alternative.
All parts could be printed without support.
I'm runnig a HT now for over 2 years i this housing and it is still working. It survived some very bad Thunderstorms whisout any issues.
New Version 04.05.2025: New version of the USB Housing.
I have needed the USB Version now myself and had an issue, with the USB cable, so I have modified the design to fit the cable from below. With this version the H&T is fitted on its side. I would recoment to use the new USB version also for H&Ts with battery, becaus ist is mor robust.
PS.: My H&T is now for 6 years in the Housing and still works good. Only the humidety sesor doss not work anymore.