Dacia (e) Spring 2005 center console
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Phoneholder, tray and cupholders as they should have been!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 587
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I love this car but some things inside could have used a small effort to make it actually useful.
Amongst other stuff i designed this centerconsole for it a while ago. I really love it so sharing.
It's designed to insert and glue together, i used a polymer based transparent caulk, simply cause it was within reach. Once the individual parts are printed and assembled simply click it into the 2 existing youclip holders in the car and that's it. Plug the charger into the cigerette lighter and enjoy. This assembly is "floating" so the original tray below can still be used for stuff.
Originally designed around a wireless charging pad i already had ("Phone holder custom", included in the file list), but the "Phoneholder main generic" can accept different sizes of charging pads up to 177x91mm and is the included body in the assembly .step file. You will need to drill or design a hole for cable passthrough as all these things have their wires at a different spot, sorry.
My version is printed in Bambu translucent PETG, 3 walls, 30% infill. Use any material as you please (mind cars get hot in summer, PLA can will go weird) and supports as needed.
Note: You have to print the Cupholder insert twice;)