Round Vacuum Pads for CNC Fixturing (Single & Dual Screw)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two round vacuum pads designed for reliable CNC fixturing.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 257
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This set includes two round vacuum pads designed for reliable workpiece fixturing on a CNC milling machine.
One pad has a 100 mm outer diameter and uses a single central countersunk M6 screw for mounting. The second, slightly smaller pad features two countersunk M6 mounting holes on a 25 mm spacing, which prevents rotation under load and provides improved stability.
Both pads are intended to be rigidly bolted to the machine table and can be used as part of a custom vacuum clamping setup. The dual-screw design was created specifically to address rotation observed with single-screw mounting.
Seal / Gasket
The vacuum seal is made using a 3 mm round foam rubber sealing cord, placed in the integrated groove. This provides reliable sealing against the workpiece surface and is easy to replace.
Print Settings
Material: PLA
Nozzle: 0.4 mm
Infill: 15 % Gyroid