BCJ CFS Addon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So long story short i had installed the BootyCallJones linear rail kit without realizing its not compatible with the CFS Upgrade kit whats so ever. Researched everywhere and every said it was impossible… so i took that personally lol.
K1C & K1 Compatibile
All parts printed in ABS/ASA/PC
Used M3x5 Screws with threadlocker and a nut for the swivel. Do not tighten all the way, allow the Extension.STL to move up and down freely.
take apart the original purge chute and transfer the spring in the back to the newly printed model.
remove the metal plate as well and transfer that over. (i used super glue to hold it in place. use whatever preferable to hold it.
Changes made to Box.cfg
pre_cut_pos_x:-1.5
pre_cut_pos_y:162.5
cut_pos_x:-1.5
cut_pos_y:208.0
safe_pos_y: 162.5
Changes made to Printer.cfg
[prtouch_v2]
clr_noz_start_x: 60
clr_noz_start_y: 200
[bed_mesh]
mesh_min: 30,30
mesh_max: 190,190
(adjust accordingly because not all builds are exactly the same. before printing start with the extrude/retract feature on the printer screen)
If you have anymore questions dont hesitate to reach me either comment or PM