Dacia (e) Spring 2025 key holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Why no flip key with this car???
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Not sure if it's useful for anyone else but my car came without a flipkey. Just a massive keyblade with sharp ends destroying pockets. Enough of that i made this thing.
How to use: Insert key holder into car. Hold the bladeless block against it when switching on the car (with the insert against the "switch". Stow away your keyblock. You can safely keep the blade inside the ignition as car wont start without the block.
How to assemble: You will need 2x M3 heatset inserts as in pic above (dia: 4.3mm) and 2x M3 bolts. Can be any but mind the head diameter (5.5mm) and NO countersink.
1- gently pry open keyblock and remove blade. Insert the "key insert" and close the block again.
2- Set the heat inserts and place the key into the holder. Push both halves together and bolt them.
3- Enjoy not losing coins or keys anymore as your pockets will be safe again.