Cotton Pad Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dispenser that allows 1 package of cotton pads (diameter 60mm length 200mm).
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 173
- Wydruki
- 1
- Wyświetlenia
- 1102
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Dispenser that allows 1 package of cotton pads (diameter 60mm length 200mm).
Fill it from the top, dispense at the bottom with proper access.
It is supposed to be wall mounted using two round head screws (parker), diameter 4mm.
Print instructions
Category: Bathroom Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 10%
Filament: Any PLA or PETG
Notes:
Designed to be 3D printing without support material.
2 perimeters and 10% grit infill worked for me. I used white PLA.
Brim advised to keep the mounting surface flat.
How I Designed This
My design was inspired by a flimsy dispenser that we once received for free with a pack of cotton pads. We liked that one, but it had broken long time ago, mainly because it had only 1 hole for hanging
This design is much sturdier, having 3 mm wall thickness, a proper contact surface for wall hanging and having 2 mounting holes.
Too steep overhangs have been prevented in the design, so it can be printed without support material. At least, it worked for me.