Neptune 4 Improved tensionner bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stronger stiffer tensionner bracket for high tension X axis
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stronger tensionner bracket compatible with the improved tensionner for toothed idler. After months of high belt tension the stock tensionner crept out of shape making the belt rub on the idler, this fixes it.
Identical aesthetic than double shear mods.
Not compatible with N4Pro
Required hardware:
3.2mm drill bit (or good alignment and drilling skills)
2.5mm drill bit
M3 Tap
BOM:
4 M3x26mm SHCS (i used 30mm like on double shear for plus/max. Max length is 52mm)
Recommended print settings:
Layer height: ≤ 0.2mm
Print orientation: as imported
Supports: Not required
Recommended materials:
PETG
ABS/ASA
Installation
Put the bracket on with the tensionner inside, put a very small amount of tension on it and make sure that it has no play. mark the points to drill with using the 3.2mm drill being careful to not shift the bracket. Remove the bracket and drill them with the 2.5mm drill bit, Tap and install with screws.