1 / 2
Holder for cable clips — zdjęcie 1
1 / 2

Holder for cable clips

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,10 € – 0,12 € netto (bez VAT)

Dla pliku: v3_0.2mm_PLA_MK3S_8m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,11 € netto (środek widełek).

Masa podana przez autora
1 g
Czas druku podany przez autora
7,8 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Holder for Best Cable Clips

Ocena
0 / 5
Polubienia
10
Pobrania
54
Wydruki
0
Wyświetlenia
481
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

I printed these with PLA 0.2mm layer high but I believe that the high doesn't matter . It is designed for 1:1, but if u want to go smaller than 100% then the clip 90% and holder 95%. Some force is needed to press down the clip in the slot. Super glue is needed to hold these two together.