Filament sensor cover Prusa i3 MK3S reverse bowden 6/4mm tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Sensor Cover for the Prusa i3 MK3S which is adapted to accept a 'reverse bowden tube' to a filament dry box.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 266
- Wydruki
- 1
- Wyświetlenia
- 1780
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Filament Sensor Cover for the Prusa i3 MK3S which is adapted to accept a 'reverse bowden tube' to a filament dry box.
You have to press fit a small piece of 6mm Festo tube in, see photo. The Festo tube has a inner diameter of 4mm. After that it accepts normal 4mm bowden tube. I do like this solution over a coupling, because it provides easier access when changing filament.
Print instructions
Category: 3D Printer Parts Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament: REAL filament PETG Black
Notes:
No brim. 5 Top/bottom layers. Perimeters 4.
Post-Printing
Take a piece of Festo tube. Outside diameter 6.0mm, inside diameter 4.0mm. Length approx. 20mm. Press fit it in the hole.
How I Designed This
It is a remix of the Filament Sensor Cover version R4 for the Prusa i3 MK3S as found on:
www.prusa3d.com/downloads/others/Original-Prusa-i3-MK3S.zip.
In ThinkerCAD I just added a cylinder on top of the filament feeder opening. Lenght 12 mm, outer diameter 10mm, inner diameter 5.8mm. Thats all.